Cookie preferences
Ozvočenja / kabli
Aktivni filtri
-
Slušalke HPH-150 B Yamaha
87,00 €Yamaha HPH150 B slušalke, idealne za
Clavinove, klaviature in studijsko delo
Optimally tuned for listening to electronic musical instruments, HPH-150 headphones offer excellent tonal projection, with a crisp, clear sound that you won't tire of even after prolonged use, and superb sound separation ensuring that each and every sonic detail is reproduced accurately.Open-ear headphones With large 40-mm diameter drivers in a rear-vented format, HPH-150 earphones feature an open-ear design that ensures superb tonal projection and comfortable listening even over extended periods.Comfortable listening for extended periods Featuring small, soft, light-weight velour ear pads, a swivel mechanism that allows the driver unit to turn 90 degrees to fit the angle of your ears, and a headband that allows smooth adjustment of its length, HPH150 earphones are designed to provide a comfortable, stress-free listening experience, hour after hour.Single cable configuration and a convenient stereo plug for easy, convenient connection The single 2-meter cable configuration of the HPH-150 ensures stress free performance and allows easy connection to your musical instrument. The HPH-150 comes with a detachable standard 6.3 mm standard stereo cable for easy connection to a range of instruments, and features durable gold-plated plugs on all connectors.
• Driver Type: Dynamic, open air• Driver Unit: F40 mm• Impedance: 48 ohms• Maximum Input: 1,000 mw• Sound Pressure Level: 101 dB• Frequency Response: 20 Hz - 20kHz• Weight (with Cable): 163 g with cable• Cable Length: 2.0 m (Single Cable)• Connectors: 3.5 mm (1/8") stereo, 6.3 mm (1/4") stereo -
Prenosni ojačevalec CM-30 Roland
285,00 €- Izjemno vsestranski monitor za studio, oder in drugo
16,5cm koaksialni, 2-stezni zvočnik s stereo predojačevalcem
- 30-vatna izhodna moč
- 3 vhodni kanali, z enim XLR vhodom za mikrofon/linijo in 2 dodatnima Aux vhodoma
- Funkcija Stereo Link za stereo povezavo med dvema enotama, za skupno do 8 stereo vhodov in 2 mono mikrofonska/linijska vhoda
- Kovinski pokrov za rešetke, kotne zaščite in ročaj za lažji transport -
-
Gewa inštrument kabel Stereo Basic Line 6m 190.030
11,80 €Stereo jack plug 6,3 mm - stereo jack plug 6,3 mm
-
-
Slušalke HPH-150 WH Yamaha
87,00 €Yamaha HPH150 WH slušalke, idealne za
Clavinove, klaviature in studijsko delo
Optimally tuned for listening to electronic musical instruments, HPH-150 headphones offer excellent tonal projection, with a crisp, clear sound that you won't tire of even after prolonged use, and superb sound separation ensuring that each and every sonic detail is reproduced accurately.Open-ear headphones With large 40-mm diameter drivers in a rear-vented format, HPH-150 earphones feature an open-ear design that ensures superb tonal projection and comfortable listening even over extended periods.Comfortable listening for extended periods Featuring small, soft, light-weight velour ear pads, a swivel mechanism that allows the driver unit to turn 90 degrees to fit the angle of your ears, and a headband that allows smooth adjustment of its length, HPH150 earphones are designed to provide a comfortable, stress-free listening experience, hour after hour.Single cable configuration and a convenient stereo plug for easy, convenient connection The single 2-meter cable configuration of the HPH-150 ensures stress free performance and allows easy connection to your musical instrument. The HPH-150 comes with a detachable standard 6.3 mm standard stereo cable for easy connection to a range of instruments, and features durable gold-plated plugs on all connectors.
• Driver Type: Dynamic, open air• Driver Unit: F40 mm• Impedance: 48 ohms• Maximum Input: 1,000 mw• Sound Pressure Level: 101 dB• Frequency Response: 20 Hz - 20kHz• Weight (with Cable): 163 g with cable• Cable Length: 2.0 m (Single Cable)• Connectors: 3.5 mm (1/8") stereo, 6.3 mm (1/4") stereo -
-
Yamaha HPH-MT7 studijske slušalke
183,00 €Yamaha HPH - MT7 profesionalne studijske slušalke General specifications HPH-MT7 Type Closed-back, Circumaural (Over Ear) Frequency Response 15 Hz - 25 kHz Sound Pressure Level 99 dB/mW Maximum Input Power 1600 mW (at 1kHz) Impedance 49 Ω (at 1kHz) Driver Unit 40 mm, Dynamic, CCAW Voice Coil Cable 3.0 m (9.8 ft), straight Connector 3.5 mm (1/8”) stereo with 6.3 mm (1/4”) stereo adaptor Dimensions (W x H x D) 170 x 195 x 98 mm (6.7" x 7.7" x 3.9") (Without cable&plug) Weight 360 g (0.8 lbs) (With cable&plug) Accessories Threaded 6.3 mm (1/4") gold-plated adaptor, Padded carrying bag High Resolution Sound
HPH-MT7 headphones are designed to deliver flat, high-resolution sound with precise stereo imaging at any sound pressure level, and to faithfully reproduce every nuance of the source signal with the highest level of accuracy possible. Yamaha has applied decades of accrued knowledge and expertise in professional and high-end audio equipment manufacturing to the design of each and every acoustic component in these headphones.
Drivers
MT7 headphones feature custom drivers equipped with CCAW voice coils and powerful neodymium magnets to achieve precise definition and control. Made from aluminum wire coated in highly conductive copper, these lightweight yet powerful drivers provide a broad frequency response of 15 Hz-25 kHz, and deliver flat, ultra high-resolution sound that meets the demands of modern professional monitoring.
Other acoustic components
From the arms to the earcups, all acoustic components in MT7 headphones have been designed to deliver the most accurate sound possible by completely eliminating extraneous resonance.
Superb Isolation. Premium Comfort.
For professional audio engineers who perform critical listening and studio recording, it is important that their headphones fit in a way that prevents fatigue during extended listening sessions, and isolation that allows concentration while working. HPH-MT7 headphones provide superb comfort and isolation, and are specifically designed to meet the high standards of professional users.
Design
MT7 headphones feature a sleek, stylish design with a closed-back, circumaural configuration that provides a comfortable fit and excellent isolation.
Ear pads
MT7 headphones are equipped with large ear pads for an extremely comfortable fit. Smooth synthetic leather and low-resistance cushions that absorb excess vibrations provide stress-free wearability and high levels of isolation—ideal for studio recording and live mix monitoring situations in particular, where sound leakage is a concern.
Wearability
A three-dimensional arm pivot construction and highly adjustable slider length allows the angle of the ear pads to fit the shape of the wearer’s head perfectly, helping to alleviate fatigue when working for extended periods. MT7 headphones also feature moveable earcups, allowing single-ear monitoring when required.
Sturdy, Reliable Construction
Built for professional use, HPH-MT7 headphones feature a sleek, simple construction with the durability to withstand the rigors of road travel. Whether you’re recording or mixing in the studio, doing live sound for an outdoor gig, or even checking tracks on the move, the MT7 headphones are a flexible monitoring solution for the professional user.
Housing, support-arms and headband
Each component in the MT7 headphones has been developed with durability in mind. The solid ABS housing, die-cast aluminum support-arms, and sweat-resistant headband ensure that these headphones are able to endure extended use in any working environment.
Connectivity
MT7 headphones have been designed to make users aware of the cable without being hindered by it, while providing enough length for monitoring applications where mobility is a consideration. For added versatility, the straight, lightweight 3 meter cable comes equipped with a corrosion-resistant gold-plated stereo mini-plug and a gold-plated 6.3 mm stereo adaptor, allowing MT7 headphones to be used with both professional audio gear and portable audio players.
-
-
-
-
-
